3
E D G E I Q H A N D B O O K
II.
I N S T R U C T I O N S A N D W A R N I N G S
BEFORE commencing installation or commissioning, please read completely through this manual
and follow all warning statements.
This manual contains important information. Failure to read and
follow all instructions prior to performing the installation and operation will void the product warranty and
could also cause serious personal injury, fire hazards and electric shock, which may lead to death. After
installation and commissioning, this manual must be made available for future operation and maintenance.
EdgeIQ products are designed and tested to meet all applicable Australian and New Zealand safety
standards (AS/NZS). Safety precautions must be observed and followed during installation and operation
to: (i) Eliminate the risk of personal injury and (ii) Ensure safe installation, as with all electrical and
electronic equipment.
1.
W A R N I N G S
1.1. Voltage
Dangerous high voltages are present within the EdgeIQ unit which must be avoided and may result in
death or serious injury, so installation, commissioning, service and maintenance of EdgeIQ products must
only
be performed by
trained, qualified and authorised personnel
who are licenced to all local applicable
standards, certifications and regulations. Means for complete electrical isolation of the device (for safe
installation, operation and maintenance) must be incorporated in accordance with the wiring standards.
Do not use EdgeIQ on circuits exceeding the specified voltage.
1.2. Safety
To prevent electrical shock and/or equipment damage, securely isolate the incoming power supply to
the installation at the main fuse or circuit breaker box until installation is complete. Children should be
supervised to ensure that they do not play with the product. This product is not intended for use by
persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction concerning use of the product
by a person responsible for their safety.
1.3. Location
• The EdgeIQ
must have MINIMUM CLEARANCE around the unit
(to ensure efficient performance)
as shown in
Diagram 2: Minimum clearance location for EdgeIQ
on page 12. Fan outlets and side
exhaust vents on the EdgeIQ unit must
ALWAYS
remain clear and free of obstruction
• Check the expected
ambient temperature range
of the selected location for the EdgeIQ unit
• Will the EdgeIQ unit be exposed to moisture and/or excessive dust?
• Any other visible hazards at the location?
Summary of Contents for EDGEIQ EE-202-0050
Page 1: ...1 2 3 INSTALL THE WORLD S BEST VOLTAGE OPTIMISATION TECHNOLOGY ...
Page 2: ......
Page 31: ......
