17
E D G E I Q H A N D B O O K
5.5. Solar inverter current transformer (CT) connection (where applicable)
• Install the split core current transformer onto the AC live wire output of the solar inverter incoming
to the switchboard.
• The arrow mark on each CT must be in the direction of current (pointing towards breaker box).
• Close CT firmly
CT Information
Output
: 333mV @ 50A
Dimension(mm)
: D=10.0; L=29.4;
: W=26.4; H=41.7;
Cable type
: UL1015,0.34mm², 22AWG / 600V
5.6. Communication kit installation
A. Remove the rubber plug and install the antenna cable by inserting the SMA female bulkhead
through the chassis hole. Tighten the hex nut.
B. Plug the dongle into the USB port (lower left side). Install the other end of the antenna cable
(CRC9) into the modem antenna connector.
Summary of Contents for EDGEIQ EE-202-0050
Page 1: ...1 2 3 INSTALL THE WORLD S BEST VOLTAGE OPTIMISATION TECHNOLOGY ...
Page 2: ......
Page 31: ......
