10
E D G E I Q H A N D B O O K
5.
I N S T A L L I N G T H E E D G E I Q
5.1. Mounting: Indoor/outdoor use, IP54 enclosure
A. Prior to mounting the EdgeIQ onto a wall, select which side of the circular knockout to remove from
your chosen cable entry for the unit. To remove the knockouts, remove the junction cover assembly
as shown and carefully punch each circular knockout while supporting the EdgeIQ case on a flat rigid
surface as shown.
B. Choose a dry and clean wall (clear of any other devices) with composition that can support the
weight of the unit (10kg), making sure there is sufficient clearance for the conduit connections from
the bottom for an upright position. The EdgeIQ
is best located in a cooler location
e.g. Garage,
under an eave or a south facing wall. Like inverters, the EdgeIQ performs best out of direct solar
radiation and away from other heat sources. Enclosure area is 588.3 x 324.0 x 92 mm.
C. Position and drill four holes, 8mm diameter on wall or structure and install the mounting screws.
(See Diagram 1: Installing mounting screws).
Circular
knockouts
Junction
cover
Use the supplied cable glands
when the knockouts of the
bottom of the unit are used
NB
:
Plain to screwed conduit
adapters may be preferred
depending on installation
conditions (Contractor supplied)
Junction
cover
Front cover
Screws
Summary of Contents for EDGEIQ EE-202-0050
Page 1: ...1 2 3 INSTALL THE WORLD S BEST VOLTAGE OPTIMISATION TECHNOLOGY ...
Page 2: ......
Page 31: ......
