Edge-Core ECS3510-10PD, Management Manual

Page: 995 / 1494

C
HAPTER
26
| Interface Commands
Interface Configuration
– 995 –
E
XAMPLE
This example shows the configuration setting for port 1.
Console#show interfaces switchport ethernet 1/1
Information of Eth 1/1
Broadcast Threshold : Enabled, 500 packets/second
Multicast Threshold : Disabled
Unknown Unicast Threshold : Disabled
LACP Status : Disabled
Ingress Rate Limit : Disabled, 1000M bits per second
Egress Rate Limit : Disabled, 1000M bits per second
VLAN Membership Mode : Hybrid
Ingress Rule : Disabled
Acceptable Frame Type : All frames
Native VLAN : 1
Priority for Untagged Traffic : 0
GVRP Status : Disabled
Allowed VLAN : 1(u)
Forbidden VLAN :
802.1Q Tunnel Status : Disabled
802.1Q Tunnel Mode : Normal
802.1Q Tunnel TPID : 8100 (Hex)
Layer 2 Protocol Tunnel : None
Console#
Table 108: show interfaces switchport - display description
Field Description
Broadcast
Threshold
Shows if broadcast storm suppression is enabled or disabled; if enabled
it also shows the threshold level ( page 1036 ).
Multicast
Threshold
Shows if multicast storm suppression is enabled or disabled; if enabled it
also shows the threshold level ( page 1036 ).
Unknown-unicast
Threshold
Shows if unknown unicast storm suppression is enabled or disabled; if
enabled it also shows the threshold level ( page 1036 ).
LACP Status Shows if Link Aggregation Control Protocol has been enabled or disabled
( page 1012 ).
Ingress/Egress
Rate Limit
Shows if rate limiting is enabled, and the current rate limit ( page 887 ).
VLAN Membership
Mode
Indicates membership mode as Trunk or Hybrid ( page 1142 ).
Ingress Rule Shows if ingress filtering is enabled or disabled ( page 1141 ).
Acceptable Frame
Type
Shows if acceptable VLAN frames include all types or tagged frames only
( page 1140 ).
Native VLAN Indicates the default Port VLAN ID ( page 1143 ).
Priority for
Untagged Traffic
Indicates the default priority for untagged frames ( page 1176 ).
GVRP Status Shows if GARP VLAN Registration Protocol is enabled or disabled
( page 1134 ).
Allowed VLAN Shows the VLANs this interface has joined, where “(u)” indicates
untagged and “(t)” indicates tagged ( page 1140 ).
Forbidden VLAN Shows the VLANs this interface can not dynamically join via GVRP
( page 1134 ).
802.1Q Tunnel
Status
Shows if 802.1Q tunnel is enabled on this interface ( page 1147 ).