Edge-Core ECS3510-10PD, Management Manual

Page: 465 / 1494

C
HAPTER
14
| Basic Administration Protocols
Simple Network Management Protocol
– 465 –
W
EB
I
NTERFACE
To configure an SNMP group:
1.
Click Administration, SNMP.
2.
Select Configure Group from the Step list.
3.
Select Add from the Action list.
4.
Enter a group name, assign a security model and level, and then select
read, write, and notify views.
5.
Click Apply
swCpuUtiFallingNotification 1.3.6.1.4.1.259.10.1.25.2.1.0.108 This notification indicates that the CPU utilization
has fallen from cpuUtiRisingThreshold to
cpuUtiFallingThreshold.
swMemoryUtiRisingThreshold
Notification
1.3.6.1.4.1.259.10.1.25.2.1.0.109 This notification indicates that the memory
utilization has risen from
memoryUtiFallingThreshold to
memoryUtiRisingThreshold.
swMemoryUtiFallingThreshold
Notification
1.3.6.1.4.1.259.10.1.25.2.1.0.110 This notification indicates that the memory
utilization has fallen from
memoryUtiRisingThreshold to
memoryUtiFallingThreshold.
dhcpRougeServerAttackTrap 1.3.6.1.4.1.259.10.1.25.2.1.0.114 This trap is sent when receiving a DHCP packet
from a rouge server.
lbdDetectionTrap 1.3.6.1.4.1.259.10.1.25.2.1.0.141 This trap is sent when a loopback condition is
detected by LBD.
lbdRecoveryTrap 1.3.6.1.4.1.259.10.1.25.2.1.0.142 This trap is sent when a recovery is done by LBD.
sfpThresholdAlarmWarnTrap 1.3.6.1.4.1.259.10.1.25.2.1.0.189 This trap is sent when the SFP's A/D quantity is
not within alarm/warning thresholds.
udldPortShutdownTrap 1.3.6.1.4.1.259.10.1.25.2.1.0.192 This trap is sent when the port is shut down by
UDLD.
swAuthenticationFailure 1.3.6.1.4.1.259.10.1.25.2.1.0.199 This trap will be triggered if authentication fails.
swAuthenticationSuccess 1.3.6.1.4.1.259.10.1.25.2.1.0.200 This trap will be triggered if authentication is
successful.
* These are legacy notifications and therefore must be enabled in conjunction with the corresponding traps on the SNMP
Configuration menu.
Table 31: Supported Notification Messages (Continued)
Model Level Group