Edge-Core ECS3510-10PD, Management Manual

Page: 695 / 1494

C
HAPTER
18
| Using the Command Line Interface
Entering Commands
– 695 –
◆
Time Range - Sets a time range for use by other functions, such as
Access Control Lists.
◆
VLAN Configuration - Includes the command to create VLAN groups.
To enter the Global Configuration mode, enter the command configure in
Privileged Exec mode. The system prompt will change to
“Console(config)#” which gives you access privilege to all Global
Configuration commands.
Console#configure
Console(config)#
To enter the other modes, at the configuration prompt type one of the
following commands. Use the exit or end command to return to the
Privileged Exec mode.
For example, you can use the following commands to enter interface
configuration mode, and then return to Privileged Exec mode
Console(config)#interface ethernet 1/5
.
.
.
Console(config-if)#exit
Console(config)#
Table 42: Configuration Command Modes
Mode Command Prompt Page
Access
Control List
access-list arp
access-list ip standard
access-list ip extended
access-list ipv6 standard
access-list ipv6 extended
access-list mac Console(config-arp-acl)
Console(config-std-acl)
Console(config-ext-acl)
Console(config-std-ipv6-acl)
Console(config-ext-ipv6-acl)
Console(config-mac-acl) 976
958
958
964
964
970
CFM ethernet cfm domain Console(config-ether-cfm) 1333
Class Map class-map Console(config-cmap) 1188
ERPS erps domain Console(config-erps) 1101
Interface interface {ethernet port |
port-channel id | vlan id }
Console(config-if) 982
Line line {console | vty} Console(config-line) 738
MSTP spanning-tree mst-configuration Console(config-mstp) 1078
Policy Map policy-map Console(config-pmap) 1191
Time Range time-range Console(config-time-range) 773
VLAN vlan database Console(config-vlan) 1137