Edge-Core ECS3510-10PD, Management Manual

Page: 827 / 1494

C
HAPTER
23
| Authentication Commands
Client
– 827 –
tacacs-server host
This command specifies the server and other optional
parameters. Use the no form to remove the server, or to restore the
default values.
S
YNTAX
tacacs-server index host host-ip-address [ key key ]
[ port port-number ] [ retransmit retransmit ] [ timeout timeout ]
no tacacs-server index
index - The index for this server. (Range: 1)
host-ip-address - IP address of a server.
key - Encryption key used to authenticate logon access for the
client. Do not use blank spaces in the string. (Maximum length: 48
characters)
port-number - server TCP port used for authentication
messages. (Range: 1-65535)
retransmit - Number of times the switch will try to authenticate
logon access via the server. (Range: 1-30)
timeout - Number of seconds the switch waits for a reply before
resending a request. (Range: 1-540)
D
EFAULT
S
ETTING
authentication port - 49
timeout - 5 seconds
retransmit - 2
C
OMMAND
M
ODE
Global Configuration
E
XAMPLE
Console(config)#tacacs-server 1 host 192.168.1.25 port 181 timeout 10
retransmit 5 key green
Console(config)#
tacacs-server key
This command sets the encryption key. Use the no form to
restore the default.
S
YNTAX
tacacs-server key key-string
no tacacs-server key
key-string - Encryption key used to authenticate logon access for
the client. Do not use blank spaces in the string.
(Maximum length: 48 characters)
D
EFAULT
S
ETTING
None