Edge-Core ECS3510-10PD, Management Manual

Page: 8 / 1494

A
BOUT
T
HIS
G
UIDE
– 8 –
◆
Added the command "terminal" on page 747 .
◆
Added UDP port parameter for the command "logging host" on
page 751 .
◆
Added the command "clock summer-time (date)" on page 766 , "clock
summer-time (predefined)" on page 768 , and "clock summer-time
(recurring)" on page 769 .
◆
Added “mac-notification” parameter for the command "snmp-server
enable traps" on page 790 , as well as the commands "snmp-server
enable port-traps mac-notification" on page 793 and "show snmp-
server enable port-traps" on page 794 .
◆ Updated description of the “level” parameter under the commands
"enable password" on page 816 , and "username" on page 817 .
◆ Added the command "accounting commands" on page 836 .
◆ Added the commands "mac-learning" on page 880 , and "port security
mac-address-as-permanent" on page 883 .
◆ Added the command "ip dhcp snooping limit rate" on page 910 .
◆ Added the commands "ipv6 dhcp snooping option remote-id" on
page 919 and "ipv6 dhcp snooping option remote-id policy" on
page 920 .
◆ Added MAC and ACL mode options for the commands "ip source-guard
binding" on page 926 , "ip source-guard max-binding" on page 929 , "ip
source-guard mode" on page 930 .
◆ Added the command "clear ip source-guard binding blocked" on
page 931 .
◆ Updated parameter list for the command "show ip source-guard
binding" on page 932 .
◆ Added the section "IPv6 Source Guard" on page 933 .
◆ Added “allow zeros” parameter to the command "ip arp inspection
validate" on page 942 .
◆ Added “counter” parameter to the command "ip access-group" on
page 962 , "ipv6 access-group" on page 968 , and "mac access-group"
on page 974 .
◆ Added Layer 3 and 4 parameters to the command "permit, deny
(MAC ACL)" on page 971 .
◆ Added the command "clear access-list hardware counters" on
page 979 , and added the “hardware-counters” parameter to the
command "show access-list" on page 980 .