Eco Heating Systems CB 105 HW, Installation, Service And User Manual

Page: 93 / 147

E93.1803.901 HW 94
cont.: 4.2.1 Boiler parame-
ters
min. max. Default unit Access
level
Description: Dis-
play
no:
DHW Tank PID I 0 1275 180 Installer Set the DHW tank PID I factor 46
DHW/Tank Setpoint 40 71 60 ⁰ C Installer Set the DHW setpoint 48
DHW Store Setpoint 40 71 60 ⁰ C Installer Set the DHW storage setpoint 115
DHW Hysteresis Down 0 20 3 ⁰ C Installer Set the DHW hysteresis down 49
DHW Hysteresis Up 2 20 3 ⁰ C Installer Set the DHW hysteresis up 50
DHW Instant PID P 0 1275 400
Installer Set the DHW instantaneous PID P
factor
51
DHW Instant PID I 0 1275 1200
Installer Set the DHW instantaneous PID I
factor 52
DHW On Off Period 10 60 10 sec. Installer Set the on/off modulation period 63
PreHeat mode on off off - User Set the PreHeat Eco mode 64
PreHeat Eco Setpoint 0 80 30 ⁰ C Installer Set the PreHeat Eco setpoint 65
DHW Max. Limit 0 90 85 ⁰ C Installer Limiting DHW setpoint max. 91
DHW Min. Limit 20 50 30 ⁰ C Installer Limiting DHW setpoint min. 96
Fan Speed Maximum 0 12750 dep unit rpm Installer Set the maximum fan speed 92
Fan Speed Minimum 0 12750 dep unit rpm Installer Set the minimum fan speed 93
Fan Speed Ignition 0 12750 dep unit rpm Installer Set the ignition fan speed 94
Prog. Input 1. 0 3 1 # Installer Select the function for program-
mable input 1 116
Prog. Input 2. 0 4 2 # Installer Select the function for program-
mable input 2 117
Prog. Input 3. 0 2 2 # Installer Select the function for program-
mable input 3 118
Prog. Input 7. 0 5 3 # Installer Select the function for program-
mable input 7 122
Prog. Input RT. 0 1 1 # Installer Select the function for the pro-
grammable RT input
124
Prog. Output 1. 0 10 4 # Installer Select the function for program-
mable output 1 125
Prog. Output 2. 0 10 0 # Installer Select the function for program-
mable output 2
126
Prog. Output 3. 0 10 6 # Installer Select the function for program-
mable output 3 127
Prog. Output 4. 0 20 18 # Installer Select the function for program-
mable output 4 128
Mod. Pump dT 5 40 16
⁰
C Installer Set the modulating pump target
delta temperature
133
Mod. Pump Start Time 0 255 60 sec. Installer Set the modulating pump start up
time 134
Mod. Pump Type Linear in-
verse
Installer Set the modulating pump model 135
Mod. Pump Mode 20 100 mod. o/f or
mod. Installer Set the modulating pump mode 136
Mod. Pump Min Pwr 30 % Installer Set the modulating pump mini-
mum duty cycle 137
Appliance Type 50 55
dep unit
# Installer Set the appliance type 138
Dair active 0 1 yes Yes/N
o
Installer Enable/disable the De-Air function 139
Nominal Flow 0 10 0 l/min Installer Sets the nominal flow 141
Anti Legionella Day mon sun Sunday Installer Select the day for the anti-le-
gionella cycle
107
Anti Legionella Hour 0 23 0 hrs. Installer Select the time for the anti-le-
gionella cycle 108
Frost Protection Enabled
Ena/Di
s
Installer Switch Frost protection on/off 205
Anti Legionella Enabled
Ena/Di
s
Installer Anti Legionella protection on/off 206
DHW Detection Delay 0 255 0 Installer Sets the detection delay. 207