Firmware V6.6.9
29.07.2020
91/147
Brief description of the buttons
2 - Overview and monitoring of the system (all menus are "read-only!")
1 Node overview
Node overview of all the E*LDS components in the system.
2 Case controllers
Overview of all case controllers
3 Pack controllers
Overview of all pack controllers
4 Receiver module wireless sensors Overview of all receiver modules and wireless sensors
5 Other LDS components
Other components of the E*LDS system
6 EU archive
EU archive
7 Signal inputs
Status of the signal inputs of the system centre
8 Special inputs
Status of the special inputs of the system centre
9 General information
Currently has no function
10 Log
Log of the installation
1 Menu 2-1 - Node Overview
List of all available components in the E*LDS system with node and position designations. Also
display of the assigned CAN bus address, controller type, firmware version and the priority. The status is also
visual.
2 Menu 2-2 - Case controllers
List of all available case controllers in the E*LDS system. If a case controller is selected, the
following information can be retrieved via the corresponding screen: node and position designations, message
priority, CAN bus address, serial number, firmware version, "Integrated via" (connected to CAN bus terminal)
and pack number ( (membership of pack x).
Unloaded refrigeration points that have been taken out of the node monitoring (e.g. in the event of
manual shutdown) are counted in the failed nodes.
