ECKELMANN CI 4000, Operating Instruction

Page: 138 / 147

Firmware V6.6.9 29.07.2020 138/147
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
91 xxxxxxxxxxxxxxxxx Text is freely editable for
message or alarm input on the system centre
e.g. input: int.E/1 (digital input IN1, terminal
A1/A2)
or
message or alarm input on the SIOX
extension module
e.g. input: SIOX2/5 (2nd SIOX module / digital
input 5, terminal E1/E2)
Eliminate fault of the external alarm
93 Emergency power supply Special input emergency power supply has
been activated ---
94 Sprinkler alarm Special input sprinkler alarm has been
activated ---
95 Store lighting Special input store lighting has been activated ---
96 Shunt lock Special input shunt lock has been activated ---
97 Meter limit monitoring Limit value of the meter has been exceeded ---
Modbus node error messages
0 Abtaufehler Mxx* Defrost fault on component Mxx*
Check component Mxx
*
1 Hardwarefehler Mxx* Hardware error on component Mxx*
Check component Mxx
*
5 SollW-Verlust Mxx* Setpoint loss on component Mxx*
Check component Mxx
*
8 RTC fault Mxx* Real-time clock of component Mxx* defective
Check component Mxx
*
10 Batteriefehler Mxx* Battery fault on component Mxx*
Check component Mxx
*
124 Coldroom door Mxx*
Coldroom door of component Mxx
*
open
Close coldroom door, check door
contact and cable connections
126
Defrost thermostat Mxx*
or
temporal defrost. Mxx* Defrost thermostat fault at component Mxx*
or
Defrost end time at component Mxx*
Check component Mxx
*
128 Sensor fault x* Mxx*
* designates the sensor
number
(1 to 4)
Sensor fault on component Mxx
*
. Possible
causes:
Sensor has been removed
Sensor short-circuit
Electrical interference has occurred
Check connection cable
Check shield
Replace affected sensor
Sensor fault Mxx*
Sensor fault on component Mxx
*
. Possible
causes:
Sensor has been removed
Sensor short-circuit
Electrical interference has occurred
Check connection cable
Check shield
Replace affected sensor
132 133 High temp. Mxx*
Low temp. Mxx*
High / low temperature at component Mxx
*
Parametrisation
Temperature sensor
Check system
150 Verdichterstör. Mxx*
Compressor fault of an AHT case Mxx
*
with
Danfoss controller
Check compressor for component Mxx *
*
160 Pressostat Mxx*
Pressure fault at component Mxx
*
Condenser Mxx *
*
dirty, check