Firmware V6.6.9
29.07.2020
135/147
•
•
•
•
•
•
•
•
0
Pushover data error
The configuration data for Pushover have
errors.
Please contact Customer Service
Pushover file error
Configuration for Pushover could not be
loaded
Please contact Customer Service
Pushover error: x
An error with the error number x has occurred
during the transmission of messages and
alarms via Pushover.
Please contact Customer Service
Pushover No network
Pushover could not establish a network
connection
Check:
Network configuration (see
Pushover configuration (see
Pushover Keys error
Incorrect user key or incorrect application
token in the Pushover configuration
Check user key and application token in
the Pushover account
Pushover message low.
The quota for Pushover messages is low
Adjust message quota in the Pushover
account
Pushover message limit
The limit for the transmission of messages in
the Pushover account has been reached
Adjust message quota in the Pushover
account
Pushover transmission error
Error in the Pushover alarm transmission
Check:
network configuration (see
Pushover configuration (see
Pushover language definition
Pushover message could not be created
Please contact Customer Service
Pushover timeout
A timeout has occurred during the
transmission of messages and alarms via
Pushover
Check:
network configuration (see
Pushover configuration (see
0
Reboot ANF_SERVICE
Reboot of the system centre requested via
LDSWin
---
0
Sum.-Z:Ung.Zaehler
No power data could be determined for at
least one meter in the totaliser module.
Check:
Configuration of the totaliser
(only using LDSWin)
0
Alarm config loss
Alarm configuration could not be loaded
Please contact Customer Service
0
Verst. DP M-Bus
Configuration change: M-bus meter data point ---
0
VNCPort x:y
VNC port x has been changed over to y
x: old VNC port
y: new VNC port
---
0
W-Stop: Power
Water stop: The limit value for the power has
been exceeded
---
W-Stop: Ung.Sum-Z
Water stop: The configured totaliser is not
valid
Check:
Configuration of the water stop
(only using LDSWin)
W-Stop: Consumption
Water stop: The limit value for the
consumption has been exceeded
---
0
GLT Type Mix 3000
There are both GLT components of the 5000
family as well as GLT components of the 3000
family on the CAN bus. This constellation is
not supported by the system centre in the
4000 family.
Removal of the GLT components of the
5000 family
0
Invalid GLT type
There is a GLT component of the 5000 family
on the CAN bus. This is not supported by the
system centre in the 4000 family.
Removal of the GLT components of the
5000 family