Echelon LONWORKS PLT-22, User Manual

Page: 59 / 128

Table 4.9 100-240VAC, L-to-E, Transformer-Isolated Coupling Circuit Component Values
Comp Value Specifications Vendor / Part Number
C1 0.033µF ±10%,
≥ 250VAC, X2 type
(1)
Nissei Denki / Arcotronics
R40333K275XXXX
C2 0.82µF ±5%, ≥ 50VDC, metalized polyester Matsushita Electric / ECQ-V1H824JL
C3 ≥ 120µF ±20%, 16VDC, aluminum electrolytic,
≤ 0.3 Ω ESR @100kHz
Matsushita Electric / ECA-1CFQ121
C4 0.033µF ±5%, ≥ 50VDC AVX / SR205C333JAA
D1 1A Reverse breakdown ≥ 50V, surge current ≥ 30A for
8.3mS, reverse recovery ≤ 200nS
1N4935
F1 6A
250VAC, slow blow
(2)
L2 27µH ±10%, Imax ≥ 500mA, RDC ≤ 0.3 Ω TAIYO YUDEN / LAL05TB270K
L3, L4 1.0mH ±10%, Imax ≥ 30mA, RDC ≤ 50 Ω TAIYO YUDEN / LAL03NA102K
R1 1M Ω
±5%, 1/4W, max working volt ≥ 360VDC
(4)
R2
82 Ω -L4RDC
(3)
±5%,
≥ 1/16W
T1 See Appendix A
PROTECT none
240VAC
240VAC
For indoor branch circuits no component required
For power entry use AC gas discharge tube
(5)
For outdoor use AC gas discharge tube
(5)
n/a
CPClare / AC240L
CPClare / AC240L
Table 4.10 100-120VAC, L-to-E, Transformer-Isolated Coupling Circuit Component Values
Comp Value Specifications Vendor / Part Number
C1 0.068µF ±10%,
≥ 250VAC, X2 type
(1) Nissei Denki / Arcotronics
R40683K275XXXX
C2 0.82µF ±5%, ≥ 50VDC, metalized polyester Matsushita Electric / ECQ-V1H824JL
C3 ≥ 120µF ±20%, 16VDC, aluminum electrolytic,
≤ 0.3 Ω ESR @100kHz
Matsushita Electric / ECA-1CFQ121
C4 0.068µF ±5%, ≥ 50VDC AVX / SR205C683JAA
D1 1A Reverse breakdown ≥ 50V, surge current ≥ 30A for
8.3mS, reverse recovery ≤ 200nS
1N4935
F1 6A
125VAC, slow blow
(2)
L2 5.6µH ±10%, Imax ≥ 500mA, RDC ≤ 0.4 Ω TAIYO YUDEN / LAL04NA5R6K
L3, L4 1.0mH ±10%, Imax ≥ 30mA, RDC ≤ 50 Ω TAIYO YUDEN / LAL03NA102K
R1 1M Ω
±5%, 1/4W, max working volt ≥ 200VDC
(4)
R2
82 Ω -L4RDC
(3)
±5%,
≥ 1/16W
T1 See Appendix A
PROTECT none
120VAC
120VAC
For indoor branch circuits no component required
For power entry use AC gas discharge tube
(5)
For outdoor use AC gas discharge tube
(5)
n/a
CPClare / AC120L
CPClare / AC120L
(1)
An X2-type capacitor is required for adequate surge immunity in branch circuit applications.
(2)
In some applications a fuse may not be required. Consult applicable safety standards.
(3)
The value of R2 should be selected so that the series combination the DC resistance of L4 and R2is equal to 82 Ω .
(notes are continued on next page)
L
ON
W
ORKS
PLT-22 Transceiver User’s Guide 4-25