background image

EN

G

LIS

H

10

Support: 

Support.Eccotemp.com

Shop Online: 

www.Eccotemp.com

Location

This water heater is for 

INDOOR 

installation ONLY!

Make sure before installation that the gas type you will 

use is the same type on the data plate.
The water heater should be installed by professionals 

from your local gas company. Please don’t attempt 

installation by yourself. Improper installation may 

cause failure or dangerous conditions such as gas 

leaking or explosion.
This water heater is an 

INDOOR

 model and

must be mounted on a vertical wall. It must

not be installed outdoors or in a confined space. The 

water heater should be installed close to the most 

frequently used outlet and its position chosen with 

safety and service in mind.
Make sure people (particularly children, disabled, and 

elderly) will not touch the hot water outlet or the flue 

terminal. The flue terminal and air inlet must be clear 

of obstruction and shrubbery.
If installed in a public corridor, please assure that the 

surrounding area is free of debris, obstruction and 

flammable materials.
The water heater must be installed on a fire retardant 

area, and must be away from all flammable materials. 

Clearance should be 1.75 ft to the left and right side of 

flammable materials, and 6.75 ft to the front.
The water heater should be installed in open area 

where strong currents are not prevalent
This water heater is of high power and will consume a 

lot of oxygen when working, so the installation area 

must be well ventilated, and air in and out of the area 

has no blockage.
The 

INDOOR 

water heater should not be installed in a 

corridor with rooms on the both sides or in the closed 

corridor.
Take measures to avoid direct wind, rain and snow. The 

installation area should be constructed of fire 

retardant materials. The power socket connecting the 

water heater should be properly grounded. The water 

heater must be located so it is not subject to physical 

damage, for example, by moving vehicles, area 

flooding, etc.

The water heater must be installed vertically with the 

water, gas, and power connections on the underside, 

pointing toward the ground.

INSTALLING THE 6.5GB WATER HEATER

Failure to properly install the water heater 

INDOORS

 as outlined in this manual can result 

in unsafe operation.

Hot and cold water lines should be insulated to 

conserve water and energy.

DO NOT

 install water heater where subject to 

vibrations.

Eccotemp does not recommend this water 

heater to have its gas, water or power turned 

on and or connected while driving or moving any 

recreational vehicles, mobile homes, boats and/or 

other watercraft. Doing so could cause damage to 

your water heater and/or recreational vehicle, 

mobile home, boat and/or watercraft. Eccotemp 

will not be liable for any damages to either. We 

always recommend you check with local 

municipalities or agencies for complete rules and 

regulations.

DO NOT

 install the water heater near vents for 

heating or cooling. A minimum of 4 feet should be 

maintained.

If the clearances stated on the Instruction/Warning 

Label, located on the front panel of the heater 

differ, install the water heater according to the 

clearances stated on the label.

        WARNING: Combustible construction

refers to adjacent walls and ceilings and should not be 

confused with combustible or flammable products and 

materials. Combustible and/or flammable products

 

and 

materials should never be stored in

the vicinity of this or any gas appliances.

        WARNING: The 6.5GB is to be installed INDOORs 

only. In some climates the ambient air temperature will 

fall below the temperature in which water freezes 32°

F / 0°C. DO NOT use the 6.5GB water heater in unsafe 

freezing conditions because it could damage the water 

heater or cause other property damage. Make sure that 

all components and controls are suitable for use in the 

current temperature before using. 

Summary of Contents for 6.5GB BUILDER Series





























Reviews: