PLEASE NOTE: 6.5GB IS FOR INDOOR PERMANENT INSTALLATIONS ONLY. THIS MANUAL AND ALL ECCOTEMP CONTENT IS SUBJECT
TO CHANGE WITHOUT NOTICE. PLEASE VISIT WWW.ECCOTEMP.COM/SUPPORT FOR MORE INFORMATION.
EN
G
LI
SH
19
Support:
Support.Eccotemp.com
Shop Online:
www.Eccotemp.com
CHECK THE WATER HEATER
After the installation of the water heater is completed, it is necessary to check
that the water heater has no air leakage and water leakage, and the ignition
operation is normal, and there is no fault alarm.
FOR YOUR SAFETY, READ BEFORE OPERATING
:
• Check the
GAS
and
WATER CONNECTIONS
for leaks before startup for the first time.
• Open the main gas supply valve to the unit using only your hand to avoid any spark.
Never use
tools. If the knob will not turn by hand, do not try to force it. Forced repair
may result in a fire or explosion due to gas
leaks.
• Check the
GAS
P
RESSURE.
• Do not try to light
the burner manually.
It is equipped
with an electronic
ignition device
which
automatically lights
the burner.
• Check for
PROPER
VENTING
and
COMBUSTIBLE AIR
to the heater.
• Purge the
GAS
and
WATER LINES
to remove any air pockets.
• Do not use this water heater if any part has been submersed under water.
INITIAL OPERATION
