LX20G_Manual_en_v2.1
Page 62 /
69
In second case according to description in chapter 6.3.5.2 –GPRS Link , it is
required to define remote link on grounds of OSM.Server parameters. As
OSM.Server collects (and transmits) information exclusively from devices saved in
data base, the first operation during remote programming is proper registration of
the device. This procedure has been described in OSM.Server Operation Manual.
8.2.1.
The first programming of device
As the device does not have defined access parameters in respect of GPRS network
and OSM.Server, programming shall be begun with providing parameters.
Irrespectively of providing these parameters the first operation shall be registration
of device in OSM.Server data base.
Before remote programming user shall check that the device is furnished with SIM
card (with reservations provided in chapter 7.1.3.2) and is connected to power
supply. User shall know serial number of device and phone number for SIM card.
Follow the procedure:
a)
With the use of OSM.Server console position cursor on proper device in
“Devices” tab.
b)
Click “Config.” option and then select “Set Configuration” function to display
lit of parameters.
c)
Enter server address, server port and APN. Click OK and system shall send to
device provided parameters (SMS).
d)
Wait till device addresses server (in “Devices” tab it will be marked with green
colour).
e)
Launch software and define options of device (description is provided in
chapter 7 of this Manual).
f)
Select “Send” to display a new window and select remote connection (GPRS
tab). Save settings in memory of device. Saving course is displayed on
special window.
g)
After saving completion close Configuration Wizard.
h)
The device is ready to transmit data.
8.2.2.
Reprogramming of device
As the device has defined access parameters in respect of GPRS network and
OSM.Server, it is possible to program device at any time.
If device is installed in secured object and is furnished with SIM card and connected
to power supply follow the procedure:
a)
Launch configuration wizard and define options of device (description is
provided in chapter 7 of this Manual).
b)
Select “Send” to display a new window and select remote connection (GPRS
tab). Save settings in memory of device. Saving course is displayed in special
window.
c)
After saving completion close Configuration Wizard
d)
The device is ready to transmit data according to new settings.
