EPX400-xC – Manual
Page 58 / 73
o
Każdy komunikat od centrali alarmowej jest raportowany do serwera OSM w
osobnej ramce / osobnym SMS.
o
If in the memory are unsent messages from the control panel, the newly
dialled phone number will not be accepted.
o
If in the memory are unsent messages from the control panel and the memory
will be disabled by changing the configuration, unsent events can be sent
when the memory will be enabled again.
8.9.1.8.
Detect off-hook after
The default value for the delay detection off-hook is 100ms. You can define your own
delay value by choosing option "After" and giving the number in milliseconds.
8.9.2.
First and Second phone number
To provide for proper cooperation between a transmitter and a control panel in DTMF
mode determination of some parameters is required. The below described functions
are analogous to the both telephone numbers that may be saved in the device
memory.
8.9.2.1.
DTMF phone number
This is a number that has been saved in memory of an alarm control panel. If the
panel is to transmit information on an event it shall dialled this number. Transmission
of this information via GSM (GPRS) will be possible if this number will be identical as
a number entered into the transmitter.
8.9.2.2.
Handshake delay
This defines time after which a transmitter generates confirmation to an alarm
control panel for correct phone number dial. Default setting is 2.0 sec. European
Standard determines this value at 0.5 to 12.5 sec.
8.9.2.3.
Protocol
Select protocol of data transmission used by an alarm control panel and that is
acceptable for monitoring station. Available options: ContactID and SIA.
Summary of Contents for EPX400-5C
Page 20: ...EPX400 xC Manual Page 20 73...
Page 63: ...EPX400 xC Manual Page 63 73...
