EBS EPX400-5C, Installation And Programming Manual

Page: 7 / 73

EPX400-xC – Manual Page 7 / 73
2. FUNCTIONAL AND TECHNICAL PARAMETERS
Transmission channels
*transparent, PSTN dialer required in a CP
ETH, GPRS, SMS, PSTN*
Backup server YES (GPRS, SMS, ETH)
User notifications SMS (5 phone numbers)
Communication watchdog YES
Inputs 9 (NO/NC/EOL-NO/EOL-NC/DEOL-NO/DEOL-NC)
Partitions 2
Simulated PSTN Line YES
Protocols supported on the phone input SIA, ContactID
Control panel dialer bypass NO (optional)
Voice gateway functions NO (optional)
Outputs 2 (OC, max. load 100mA)
1 relay output (NO/NC, max. load 1A/30VDC or
0,5A/125VAC)
Output functions - unavailable GSM signal or ETH channel
- GSM jamming (only for BGS2-W module)
- from server or through SMS
- incoming CLIP
- in reaction on events and inputs
RC Receiver: 434 MHz NO (optional)
Max.number supported keyfobs -
Power 12V YES (max. load 200mA)
Serial interface RS232 / RS485 (lines: RxD, TxD, RTS, CTS)
transmission speed up to 115200bps
Alarm events buffer size -
Quantity of system events stored in history min. 5000
Event's timestamps -
GPRS/SMS transmission security AES encryption
Status LEDs
(functions)
4 LEDs (GSM signal level, device state, DTMF
communication)
Configuration Remote: GPRS, SMS, CSD, ETHERNET cable via Web
Browser
Local: PC through RS232 (required cable: GD-PROG
or SP-PROG)
Remote firmware update YES
Remote access to the control panels NO (optional)
Phone line protection circuit NO (optional)
Dual SIM NO (optional)
Multiantenna steering output NO (optional)
Supported modems model EPX400-5C: Cinterion BGS2-W (Quad-Band
GSM: 850, 900, 1800, 1900 MHz)
model EPX400-6C: Cinterion EHS6 (Five Bands UMTS:
800, 850, 900, 1900, 2100 MHz; Quad-Band GSM:
850, 900, 1800, 1900 MHz)
Ethernet - 10BaseT/100Base-TX IEEE 802.3 compliant
- speed and duplex auto-negotiation
- auto-detection of correct cable connections
(cross/straight)
Power supply parameters
- PCB
Voltage supply 18V
AC
(acceptable: 16-20V
AC
)
Power consumption
DC (AKU)
(average / max)
100mA/170mA@13,8VDC*
* Measured with full charged battery, modem BGS2-W
Cinterion
120mA/205mA@13,8VDC*
* Measured with full charged battery, modem EHS6-A
Cinterion
Power consumption
AC (AC)
(average / max)
125mA/185mA@18VAC*
* Measured with full charged battery, modem BGS2-W
Cinterion
156mA/235mA@18VAC*
* Measured with full charged battery, modem EHS6-A
Cinterion
Power supply parameters
- PCB in EBS plastic casing
Voltage supply 230V
AC
(acceptable: 190-250V
AC
)
Power consumption
(average / max)
3W/13W@230V
AC
(recommended transformer 20W)