EPX400-xC – Manual
Page 12 / 73
4.
QUICK START PROCEDURE
NOTE:
Do not insert SIM card before the first programming of transmitter as it may
block the card if PIN code is required for the card.
This chapter is purposed for users that possess experience regarding GPRS
data transmission systems and who work with OSM.Server server. Other
users shall skip this chapter and go to chapter 5. of this Manual.
As many users possess protected facilities spread at vast locations, local
programming of transmitter is not always available (with computer keyboard and
programming cable).
Two phases comprise programming in this option:
a)
sending to transmitter of main parameters (with SMS) that enable GPRS
connection to communication server (OSM.Server system).
b)
full configuration of device with remote programming (GPRS transmitters
configurator and OSM.Server).
Quick start procedure:
a)
insert into device SIM card with PIN code 1111 or without PIN code.
b)
connect power supply for module,
c)
send to SIM card number with SMS parameters related to connection of device
to communication server (OSM.Server)
d)
waiting for moment, when device indicates connection to server
Note:
Connection to server is possible if the device was registered into it.
Registration procedure has been described in OSM.Server Operation Manual.
e) complete, remote programming with GPRS transmitters configurator.
SMS text message shall provide the following information:
<transmitter’s service code>
█
SERVER=
<server address>
█
PORT=
<server port>
█
APN=
<access point name>
█
UN=
<user ID number>
█
PW=
<user password>
Where:
█
: space (every parameter shall be separated with space – blank character)
<transmitter’s service code>
: factory settings –
1111
.
<server address>
: address of communication server purposed for collection of
transmitter signals e.g. 89.123.115.8. In case address is provided as domain e.g.
block.autostrada.com, SMS message shall include DNS1 parameter (address of main
DNS server)
<server port>
: Number of port in server that receives messages from a device
<access point name>
: defines access point name to GSM network.
If private network is used, SMS message shall provide the following parameters:
UN=
<user ID number>
and PW=
<user password>
.
Exemplary SMS to set the parameters of the GPRS connection is as follows (if we use
public network and provide server address as IP):
Summary of Contents for EPX400-5C
Page 20: ...EPX400 xC Manual Page 20 73...
Page 63: ...EPX400 xC Manual Page 63 73...
