EBS EPX400-5C, Installation And Programming Manual

Page: 35 / 73

EPX400-xC – Manual Page 35 / 73
8.1.3.2. Ethernet and GPRS Parameters
Channel Role (Channel Priority)
Selecting "Advanced setting" in the “Channels used to connect to monitoring station
server " section (see chapter 8.1.3.1) will unlock the fields for each channel and
individually prioritize the transmission:
There are four settings possible:
 Unused (the communication in this way will not be possible),
 Main,
 Backup,
 Emergency.
Test Events Period
The device sends message “Test” with determined interval that informs monitoring
station that the device is in operation mode. In this field you can determine how
often this message will be sent (in seconds).
Primary Server Parameters
Interval between subsequent connection attempts
Configured and equipped with SIM card device will try to make automatic connection
with server. In this field you define interval (in seconds) after which next connection
attempt will follow if the previous attempt failed.
Number of connections attempts before switching to backup server
In this filed you determine how many times the device will try to make connection to
primary server. If connection fail, after execution of some connections, device will
start connecting to backup server.
Always try to connect to primary server at first
Mark this check box means, that the device will try in first order to connect to
primary server, without regard on definition of parameters for backup server
(especially number of connection attempts).
Backup Server Parameters
Interval between subsequent connection attempts
In this field you define the period (in seconds) after which next attempt of connection
to backup server will follow if the previous attempt failed.