EPX400-xC – Manual
Page 32 / 73
monitor.gprs.com. In this case it is required to provide minimum one address of DNS
server.
Backup Server Port
It determines server port that was selected in backup server for collection of data
from transmitter.
IP
Option “DHCP”: address of the device and other network settings can be assigned by
the DHCP server (default setting).
Option “Static”: allows you to define your own settings. The remaining fields form
described below will be activated.
Address
The IP address of the device for the LAN to which you want to work.
Mask
Subnet mask, default mask is "255.255.255.0".
Gate
The IP address of the computer on the local network that routes the traffic from the
device to the outside network and the communication server.
DNS1, DNS2
It determines address of main and backup DNS server (Domain Name System).
If IP server address has been entered in form of domain, it is required to provide
minimum one DNS address.
8.1.2.2.
GPRS parameters
Primary Server Address
It is address of receiver of monitoring system (OSM.Server) or computer where
“Communication Server” software has been installed , e.g. 89.123.115.8. This
address may be provided in domain name of server, e.g. modul.gprs.com. In this
case it is required to provide minimum one address of DNS server.
Primary Server Port
It determines server port that was selected in server for collection of data from
transmitter.
Summary of Contents for EPX400-5C
Page 20: ...EPX400 xC Manual Page 20 73...
Page 63: ...EPX400 xC Manual Page 63 73...
