EPX400-xC – Manual
Page 30 / 73
will require service code (ATS) knowledge! In addition, remote commands
for setting the above parameters will be blocked.
As a result, it will be
impossible to register control panel in other monitoring station without authorization.
On the other hand, installer will be able to:
• change parameters related to: users, zones, wireless devices, partitions,
outputs, remote controllers, emergency buttons, monitoring, SMS notification
and certain system options,
• send it to control panel,
• update firmware
• read settings saved on the device,
• save control panel settings to .emi file.
Default service code (ATS) is 0000 – it is recommended to change it to unique,
preferably 7-digit code.
NOTE!
In case of losing this code it will be necessary to send the device to EBS
office.
8.1.1.8.
Default restoral lock
The function “Defaults restoral lock” allows the user to turn off the ability to restore
the factory-default installer’s code. However, when restoring default settings using
the Configuration, when the "Restore device’s default settings" option is selected, a
window with a request to enter the installer’s code or service code (ATS) will appear.
When this function is turned on, the Manufacturer recommends the installer’s code
and service code (ATS) are changed.
8.1.1.9.
Temporarily block access after 3 failed service code
authorization attempts
Using the wrong code 3 times within 60 seconds blocks access to the device for
90sec. After this time, it will be possible to make another attempt.
Summary of Contents for EPX400-5C
Page 20: ...EPX400 xC Manual Page 20 73...
Page 63: ...EPX400 xC Manual Page 63 73...
