EPX400-xC – Manual
Page 59 / 73
Note:
1) For all protocols you may use following options:
o
[Enable SMS sending] which means that in case of no GPRS connection,
data will be sent via SMS (if this mode will be accessible).
o
[Don’t transmit data when external phone line is available] which means
that when the external PSTN line is available then it will be used during
transmission from the control panel.
2) [Disable CRC checking] option may be used for ContactID format. Some control
panel generate improper messages regarding a control sum for transmitted data, the
device is not able to confirm collection of data, and as a result the panel tries to send
them again (until execution of all determined trials). Select this option to avoid the
above mentioned.
8.10.
FIRMWARE
The device is equipped with built in bootloader that allow for updating and change of
firmware. During programming all information is displayed in respect of carried out
operation.
Summary of Contents for EPX400-5C
Page 20: ...EPX400 xC Manual Page 20 73...
Page 63: ...EPX400 xC Manual Page 63 73...
