5
2 Safety
Mounting and Operating Instructions CEAG Central Battery System ZB-S 40071860179 (L) November 2018 www.ceag.de
2 Safety
The central battery system is designed and built in
conformity with the latest technical rules at the time of
its development and production, so it is safe to operate.
Danger maybe presented by the device, if it will be used
for other than the intended purpose and by unskilled
personnel.
WARNING!
When planning a lighting system with a ZB-S system you
first establish wether the proposed electrical installations
satisfy local environmental conditions.
Special environmental conditions (e. g. areas subject
to explosion hazards or areas with an aggressive atmo-
sphere) call for special equipments and installations.
Only operate the system and parts connected to it when
they are in a technically perfect condition, and comply
with
O
O
the safety and hazard information given in these
assembly and operating instructions,
O
O
the work and safety instructions issued by the operator
of the system,
O
O
the installation and operating data given in „3 Technical
data“ and in the CEAG Catalogue.
Faults that can affect the operation or safety of the
system must be reported immediately to the company
officers and remediated.
2.1 Inteded Use
The ZB-S and US-S Central Battery Systems are
exclusively designed to monitor and control a lighting
system with general and emergency lighting. Their
operation is program controlled. They must be
programmed and set up by engineers with specialist
knowledge of the legal and technical requirements
governing the assembly and operation of lighting systems.
Only use luminaires if they constructed by CEAG or
fit with the normative and technical guidelines of the
emergency lighting. Corresponding details for the
conformity you can download on our website
(www.ceag.de).
The operating safety can only be guaranteed by intended
use of the systems.
The ZB-S systems complies with the requirements of the
EN 62034 and is classified as type PERC.
ATTENTION!
Every use beyond or different than the intended purpose is
prohibited, and therefore not in accordance with regulations!
2.2 Contents of Operating Instructions
Every person, ordered to work with the system, has to
read the instructions carefully to understand them before
work begins. This takes also place when the person
has already worked with a similar kind of battery or was
instructed by the manufacturer.
2.3 Changes and Modifications to the
System
To avoid danger and to assure optimum performance,
changes and modifications to the system are not allowed,
except when the manufacturer has approved them.
Any work involved in extensions, conversions or repairs
and which is not described in this manual must be carried
out by specially trained technical and service personnel
(of the manufacturer CEAG or of CEAG-authorised
distribution and service contractors)!
