37
User Manual
MN040024EN
Effective November 2016
DX-NET-ETHERNET2-2 fi eld bus connection
EtherNet/IP for variable frequency drive DE1/DC1
EATON
www.eaton.com
Appendix B—Firmware upgrade
Enabling Windows TFTP client
If the PC has never been used for firmware upgrades before, then the Windows TFTP Client
will need to be enabled.
•
Start Menu
A
Control Panel
A
Programs and Features
•
Select ‘Turn Windows features on or off’
•
If not already selected, enable ‘TFTP Client’
Performing firmware upgrade
x
Confirm that the firmware upgrade package contains the
following files, where ‘aaabbbSccc’ indicate the release version:
•
APP_DX-NET-ETHERNET2-2_aaabbbSccc.cfg
•
APP_DX-NET-ETHERNET2-2_aaabbbSccc.aes
•
Upgrade_APP_DX-NET-ETHERNET2-2.bat
x
the ‘aaabbbSccc’ values of the .cfg and .aes files must match
x
Set the IP address of the DX-NET-ETHERNET2-2 to its default
settings, either via an Identity Class Type 1 reset or via the
Webserver. The values should be as follows:
•
Configuration Method = Static
•
IP Address: 192.168.1.254
•
Network Mask: 255.255.255.0
x
Upgrade_APP_DX-NET-ETHERNET2-2.bat
x
APP_DX-NET-ETHERNET2-2_aaabbbSccc.cfg will be transferred,
during which the module indicators will be illuminated as per
‘PBL Stage 2: Receiving application configuration’
x
Once the Transfer of APP_DX-NET-ETHERNET2-2_aaabbbSccc.cfg
is complete, the module indicators will be illuminated ‘PBL Stage
3: Awaiting application data’
x
APP_DX-NET-ETHERNET2-2_aaabbbSccc.aes will be transferred,
during which the module indicators will be illuminated as per
‘PBL Stage 3: Awaiting application data’
x
Once the Transfer of APP_DX-NET-ETHERNET2-2_aaabbbSccc.cfg
is complete, the module return to ‘Normal Running’ conditions
x
Firmware upgrade has been applied
Summary of Contents for PowerXL DX-NET-ETHERNET2-2
Page 2: ......