10
User Manual
MN040024EN
Effective November 2016
DX-NET-ETHERNET2-2 fi eld bus connection
EtherNet/IP for variable frequency drive DE1/DC1
EATON
www.eaton.com
ote:
N
‘Configured’ indicated the values currently stored within the module.
ote:
N
‘Working Values’ indicate the values currently in use (if not yet edited), or the values to be applied.
To commit values press ‘Set’
Module will reboot if data is valid, otherwise an error status will be displayed:
Table 8. Status
State
Indication
‘Data Submitted...‘
Data has been submitted to DX-NET-ETHERNET2-2, awaiting reply
‘Data Read/Write Error’
An error occurred, data was not stored
‘Resource Busy’
Another operation was accessing the required data for example a EtherNet/IP
Class 0xF5 service
‘Invalid request - Data Validation Error’
One or more data values were invalid
‘Data Accepted - Restarting Module at
new IP Address...’
Data accepted and stored
Data is read from the Drive.
If the Drive does not support this functionality, then the following data is required:
•
Vendor Name: ‘Unknown Modbus Device’
•
Product Code: Empty
•
Version Number: Empty
Summary of Contents for PowerXL DX-NET-ETHERNET2-2
Page 2: ......