32
User Manual
MN040024EN
Effective November 2016
DX-NET-ETHERNET2-2 fi eld bus connection
EtherNet/IP for variable frequency drive DE1/DC1
EATON
www.eaton.com
Creating a project in RSLogix5000
Create a project in RSLogix5000. Give the project a name and select the controller type, per the following:
Select OK to create the project.
Install EDS files for Eaton products into RSLogix5000
There is an EtherNet/IP EDS file for all Eaton EtherNet/IP products, compatible with RSLogix5000,
version 20 or later. These files can be installed into the RSLogix5000 software via the following:
1. Download the EDS files for Eaton EtherNet/IP products from the following link: www.eaton.com/drives.
The eds files are under OEM Drives, then either under the PowerXL DE1 or PowerXL DC1. Download
and save the eds files on your hard drive.
2. Select the Tools drop down menu in RSLogix5000.
3. Select EDS Hardware Installation Tool.
4. Follow the installation wizard, browsing for the EDS file previously saved to your hard drive.
Once the EDS file has been installed into RSLogix5000, the DC1/DE1 drive can be added to an
EtherNet/IP network, per the following.
Summary of Contents for PowerXL DX-NET-ETHERNET2-2
Page 2: ......