34
User Manual
MN040024EN
Effective November 2016
DX-NET-ETHERNET2-2 fi eld bus connection
EtherNet/IP for variable frequency drive DE1/DC1
EATON
www.eaton.com
Select the checkmark to the left of Module Type Vendor Filters
to clear all check marks on the right portion of the window. Then
select “Eaton Electrical” to check the box to its left and only Eaton
products will be displayed below, as follows:
Select the DX-NET-ETHERNET2-2 from the list, then select Create.
This same eds file is used for the DC1 and DE1. Fill in the necessary
information: Device Name, IP address and I/O assemblies as shown
below. Note that there is only one I/O assembly pair for these
devices. The I/O assembly pair for the DC1 drive is the same for the
DE1 drive.
Summary of Contents for PowerXL DX-NET-ETHERNET2-2
Page 2: ......