![background image](http://html1.mh-extra.com/html/eaton/nzm2/nzm2_manual_4696860054.webp)
Parameter setting
49
11/04 MN01219002Z-EN
• Fieldbus coupling
Like other parameters, the function of the DMI (DMI or
motor starter, starter type), the control circuit devices used
(switches or pushbuttons) and the changeover time can also
be modified or read via a fieldbus such as PROFIBUS-DP. The
motor starter can also be controlled via the fieldbus instead
of via the switches or pushbuttons connected directly to the
DMI.
For more precise information on the data for PROFIBUS-DP
refer to
a
chapter 3, Page 75.
The control of the motor starter can be implemented by the
DMI via switches or buttons, and from the fieldbus via
command codes or level controlled using output data. The
behaviour in all four possible combinations between the
fieldbus and DMI control should be illustrated by the
following diagrams:
h
For detailed motor starter wiring plans refer to the Eaton
Wiring Manual, FB0200-004, chapter "All about motors".
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com