![background image](http://html1.mh-extra.com/html/eaton/nzm2/nzm2_manual_4696860177.webp)
NZM-XDMI-DPV1
(PROFIBUS-DPV1 Interface for
DMI)
172
11/04 MN01219002Z-EN
DMI bus outputs object
This object enables control of the state of the outputs of the
DMI.
This object is a write only object. It can only be accessed by
a class 2 DPV1 master.
Intended usage
Use this object in order to control the state of the outputs of
the DMI.
DMI_outputs[4]
Bit 3
State Q3
DMI_outputs[5]
Bit 4
State Q4
DMI_outputs[6]
Bit 5
State Q5
Bit 6 and Bit 7
Not used
h
A set bit corresponds to the “ON” state and a bit which is
not set corresponds to the “OFF” state.
Variable access
(example)
Data position
Meaning
h
You can only set the state of outputs of the DMI with this
object, if they have been parameterized for the “bus
access” switching signal. Control signals for outputs,
whose switching signal has not been parameterized for
“bus access” will be ignored.
You can only access this object if no class 1 DP master
cyclically transfers data with the NZM-XDMI-DPV1
module.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com