DMI
34
11/04 MN01219002Z-EN
The Standard display can be assigned with data selected as
required from the Display menu (
a
section “Display
menu”, Page 28). In this way you can configure the
Standard display for the requirements at hand.
The Standard display contains up to 6 lines. Lines that are
not visible can be selected using the cursor buttons
Í
or
Ú
.
Figure 6: Operating principle of the Standard display
New Data 7 in the display is always added to line 1. Data 1
is deleted if there are more than 6 entries.
Line 5: Data 2
Line 6: Data 1
Line 1: Data 6
Line 2: Data 5
Line 3: Data 4
Line 4: Data 3
Data 7
Visible area in the display
Can be accessed via the
cursor buttons
Data 1
h
If the connection between DMI and NZM is interrupted,
the DMI displays the last values for all circuit-breaker data
(currents, parameters, status, type code) until a new
connection is established.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com