NZM-XDMI-DPV1
(PROFIBUS-DPV1 Interface for
DMI)
124
11/04 MN01219002Z-EN
Status[36]
Bit 3
Trip via N-pole
Bit 4 to Bit 7
Not used
Octet 26
2)
Phase issuing alarm
Bit 0 to Bit 3
Not used
Status[45]
Bit 4
Alarm from L1
Status[46]
Bit 5
Alarm from L2
Status[47]
Bit 6
Alarm from L3
Status[48]
Bit 7
Alarm from N-pole
Octet 27
1)
Fault states
Status[49]
Bit 0
NZM fault: A/D convertor
Status[50]
Bit 1
NZM fault: Signal processing
Status[51]
Bit 2
NZM fault: Convertor block
Status[52]
Bit 3
NZM fault: EEPROM
Status[53]
Bit 4
NZM plug in module 1 fault
Status[54]
Bit 5
NZM plug in module 2 fault
Status[55]
Bit 6
NZM plug in module 3 fault
Status[56]
Bit 7
NZM plug in module 4 fault
1) Prerequisite: Parameter is supported by the connected circuit-breaker,
otherwise “Not used”.
2) The meaning is relevant when the respective Bit is set.
3) With a short-circuit (Trip
I
i
) the tripping phase and the phase status cannot be
identified with certainty.
Variable access
(example)
Data position
Meaning
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
