Eaton Network-M2 User Manual Download Page 152

Page: 152 / 268

Alarms

Contextual help of the web interface – 152

•
•
•
•
•
•

When the number of alarms is above the number of alarms per page, the buttons First, Previous and Next appears to allow
navigation in the Alarm list.

3.10.5 Export

Press the Export button to download the file.

3.10.6 Clear

Press the Clear button to clear alarms that are older than a specified date and up to a defined severity.

3.10.7 Alarms list with codes

To get access to the Alarm log codes or the System log codes for email subscription, see sections below:

System log codes
UPS(HID) alarm log codes
9130 UPS(XCP) alarm log codes
ATS alarm log codes
EMP alarm log codes
Network module alarm log codes

3.10.8 Access rights per profiles

Administrator

Operator

Viewer

Alarm list

Export

Clear

3.10.8.1 For other access rights

For other access rights, see the

Information>>>Access rights per profiles

section.

Summary of Contents for Network-M2













































































































































































































































































Search results

Summary of Contents for Network-M2

Reviews:

Related manuals for Network-M2

Brands by name

Popular brands

Eaton Network-M2, User Manual

Search results

Summary of Contents for Network-M2

Reviews:

Related manuals for Network-M2

Brands by name

Popular brands