Eaton Network-M2 User Manual Download Page 112

Page: 112 / 268

Settings

Contextual help of the web interface – 112

•
•
•

SNMP monitoring Battery status, power status, events, and traps are monitored using third-party SNMP managers.

To query SNMP data, you do not need to add SNMP Managers to the Notified Application page.

To set-up SNMP managers:

Configure the IP address.
Select SNMP v1 or v1 and v3.
Compile the MIB you selected to be monitored by the SNMP manager.

List of supported MIBs:

xUPS MIB | Standard IETF UPS MIB (RFC 1628) | Sensor MIB

Press the Supported MIBs button to download the MIBs.

3.7.5.1.1 Settings

This screen allows an administrator to configure SNMP settings for computers that use the MIB to request information from the
Network Module.

Default ports for SNMP are 161 (SNMP v1 and v3, set/get) and 162 (traps). These ports can be changed on the settings screen for
additional security.

To configure the SNMP settings:

a Enable the SNMP agent

In addition to this also v1 and/or v3 must be enabled, along with appropriate communities and activated user accounts to allow
SNMP communication.

Press Save after modifications.

Summary of Contents for Network-M2













































































































































































































































































Search results

Summary of Contents for Network-M2

Reviews:

Related manuals for Network-M2

Brands by name

Popular brands

Eaton Network-M2, User Manual

Search results

Summary of Contents for Network-M2

Reviews:

Related manuals for Network-M2

Brands by name

Popular brands