Eaton Network-M2, User Manual

Page: 205 / 268

Installing the EMP
Servicing the EMP – 205
Bottom mounting Side mounting
6.3.2.3 Wall mounting with screws example
To mount the EMP on the wall close to the rack, use the supplied screw and screw anchor. Then, mount
the EMP on the screw and tighten it.
6.3.2.4 Wall mounting with nylon fastener example
To mount the EMP within the enclosure environment, attach one nylon fastener to the EMP and the other nylon fastener to an
enclosure rail post. Then, press the two nylon strips together to secure the EMP to the rail post.
Cut nylon fastener and stick it on the EMP bottom on the location highlighted below,this will prevent to interfere
with the EMP data acquisition parts.