Eaton Network-M2 User Manual Download Page 123

Page: 123 / 268

Settings

Contextual help of the web interface – 123

•
•
•
•

•
•
•

•
•
•
•
•

modbus_statistics

Description

modbus_statistics displays Modbus RTU and TCP status and server statistics:

Bus character overrun count
Bus frame error count
Bus parity error count
Buffer overrun count

Bus message count
Valid message count
CRC error count

Incoming message count
Discarded message count
Processed message count
Success returned count
Exception returned count

Help

modbus_statistics

Display modbus server statistics

-h, --help Display the help page.

-r, --reset Reset modbus server statistics.

The counter from A1.1 to A1.4 are reset only at startup of the

server.

3.7.6.6.1 For other CLI commands

This section is only for the Modbus Network Module INDGW

See the CLI commands in the

Information>>>CLI

section.

Summary of Contents for Network-M2













































































































































































































































































Search results

Summary of Contents for Network-M2

Reviews:

Related manuals for Network-M2

Brands by name

Popular brands

Eaton Network-M2, User Manual

Search results

Summary of Contents for Network-M2

Reviews:

Related manuals for Network-M2

Brands by name

Popular brands