Eaton Network-M2 User Manual Download Page 49

Page: 49 / 268

Controls

Contextual help of the web interface – 49

•
•

3.3.7.1 For other settings

3.3.8 Access rights per profiles

Administrator

Operator

Viewer

Meters

Battery health: Launch test/Abort

Logs configuration

3.3.8.1 For other access rights

3.4 Controls

3.4.1 Entire UPS

Controls are displayed for the entire UPS, and not for specific outlet options.

The table in this section displays UPS status, the associated commands (on/off), and the pending action.

3.4.1.1 Status

Reflects the current mode of the UPS. The following is a list of potential table values that are displayed based on the UPS topology.

On — Protected/Not protected
Off — Not powered/Not protected

3.4.1.2 Commands

A set of commands are available and activated when one of the following buttons is pressed. A confirmation window appears.

For other settings, see the

Information>>>Default settings parameters

section.

For other access rights, see the

Information>>>Access rights per profiles

section.

Summary of Contents for Network-M2













































































































































































































































































Search results

Summary of Contents for Network-M2

Reviews:

Related manuals for Network-M2

Brands by name

Popular brands

Eaton Network-M2, User Manual

Search results

Summary of Contents for Network-M2

Reviews:

Related manuals for Network-M2

Brands by name

Popular brands