Eaton Network-M2, User Manual

Page: 238 / 268

List of event codes
Information – 238
7.5.6 Network module alarm log codes
7.5.6.1 Warning
7.5.6.1.1 Protection
Code Severity Active message Non-active message Advice
1032 Warning Protection: immediate shutdown in progress Protection: immediate shutdown completed -
1053 Warning Protection: communication lost with agent Protection: communication recovered with agent -
7.5.6.1.2 Alarms
Code Severity Active message Non-active message Advice
1303 Warning Alarms: the number of alarms is too
high and above 6 000 Alarms: the number of alarms is
back to normal 2 000 alarms have been
erased and saved in a
backup file.
7.5.6.2 Info
7.5.6.2.1 Protection
Code Severity Active message Non-active message Advice
1016 Info Protection: sequential shutdown scheduled Protection: sequential shutdown canceled -
1017 Info Protection: sequential shutdown in progress Protection: sequential shutdown completed -
1054 Info Protection: agent is in unknown state Protection: agent is in service -
1055 Info Protection: agent is starting Protection: agent is in service -
1056 Info Protection: agent is stopping Protection: agent is in service -
1057 Info Protection: agent is stopped Protection: agent is in service -
1100 Info Schedule: shutdown date reached Schedule: shutdown initiated -
7.5.6.2.2 Communication
Code Severity Active message Non-active message Advice
1300 Info Communication: No device connected Communication: Communication with the device is back -
1301 Info Communication: Device not supported Communication: Communication with the device is back -
To retrieve Alarm logs, navigate to Contextual help>>>Alarms section and press the Download alarms button.
Below codes are the one to be used to add "Exceptions on events notification" on email sending configurations.
Some zeros maybe added in front of the code when displayed in emails or logs.