![background image](http://html1.mh-extra.com/html/eaton/iq-100-series/iq-100-series_user-and-installation-manual_3829319052.webp)
IQ 100 Series (130/140/150) Meter
Programming the Meter Using the Front Panel
52 User and Installation Manual IM02601003E-July 2010 www.eaton.com
Using Operating Mode
Operating Mode is the IQ 100 Series meter’s default mode, that is, the standard front panel display.
After Startup, the meter automatically scrolls through the parameter screens, if scrolling is enabled.
Each parameter is shown for 7 seconds, with a 1 second pause between parameters. Scrolling is sus
-
pended for 3 minutes after any button is pressed.
1. Press the Down button to scroll all the parameters in Operating Mode. The currently “Active,” i.e.,
displayed, parameter has the Indicator light next to it, on the right face of the meter.
2. Press the Right button to view additional readings for that parameter. The table below shows possible
readings for Operating Mode. Sheet 2 in
Appendix A
shows the Operating Mode Navigation Map.
NOTE: Readings or groups of readings are skipped if not applicable to the meter type or hookup, or if
they are disabled in the programmable settings.
OPERATING MODE PARAMETER READINGS
POSSIBLE READINGS
VOLTS L-N
VOLTS_LN
VOLTS_LN_
MAX
VOLTS_LN_
MIN
VOLTS L-L
VOLTS_LL
VOLTS_LL_
MAX
VOLTS_LL_
MIN
AMPS
AMPS
AMPS_NEU-
TRAL
AMPS_MAX AMPS_MIN
W/VAR/PF
W_VAR_PF
W_VAR_PF_
MAX_POS
W_VAR_PF_
MIN_POS
W_VAR_PF_
MIN_NEG
VA/Hz
VA_FREQ
VA_FREQ_
MAX
VA_FREQ_
MIN
Wh
KWH_REC
KWH_DEL
KWH_NET
KWH_TOT
VARh
KVARH_POS KVARH_
NEG
KVARH_NET KVARH_
TOT
VAh
KVAH