![background image](http://html1.mh-extra.com/html/eaton/iq-100-series/iq-100-series_user-and-installation-manual_3829319087.webp)
IQ 100 Series (130/140/150) Meter
Appendix B: Modbus Map
Description
1
Format
Range
6
Units or
Resolution
Comments
#
Reg
Modbus Address
Hex
Decimal
11
12
13
14
15
Not used.
Not used.
Not used.
All 3 voltage angles are measured for Wye and Delta hookups. For 2.5 Element, Vac is measured and Vab & Vbc are calculated. If a voltage phase is missing, the two voltage angles in which it participates
are set to zero. A and C phase current angles are measured for all hookups. B phase current angle is measured for Wye and is zero for other hookups. If a voltage phase is missing, its current angle is
zero.
If any register in the programmable settings section is set to a value other than the acceptable value then the meter will stay in LIMP mode. Please read the comments section or the range for each register in
programmable settings section for acceptable values.
User and Installation Manual
IM02601003E -December 2009
MM-9