EDR-5000
IM02602007E
Name
Description
Assignment via
RO6.5
Module Input State: Assignment
[Device Para
/Relay Outputs
/RO-6 X5
/RO 6]
RO6.6
Module Input State: Assignment
[Device Para
/Relay Outputs
/RO-6 X5
/RO 6]
RO6.7
Module Input State: Assignment
[Device Para
/Relay Outputs
/RO-6 X5
/RO 6]
Ack signal RO 6
Module Input State: Acknowledgment signal for the Relay Output. If
latching is set to active, the Relay Output can only be
acknowledged if those signals that initiated the setting are fallen
back and the hold time is expired.
[Device Para
/Relay Outputs
/RO-6 X5
/RO 6]
Signals of RO-6 X
Signal
Description
RO 1
Signal: Relay Output
RO 2
Signal: Relay Output
RO 3
Signal: Relay Output
RO 4
Signal: Relay Output
RO 5
Signal: Relay Output
RO 6
Signal: Relay Output
DISARMED!
Signal: CAUTION! RELAYS DISARMED in order to safely perform maintenance while eliminating
the risk of taking an entire process off-line. (Note: Zone Interlocking and Supervision Contact
cannot be disarmed). YOU MUST ENSURE that the relays are ARMED AGAIN after maintenance
Outs forced
Signal: The State of at least one Relay Output has been set by force. That means that the state of
at least one Relay is forced and hence does not show the state of the assigned signals.
www.eaton.com
127