EDR-5000
IM02602007E
Name
Description
IEC61850.VirtOut18-I
Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut19-I
Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut20-I
Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut21-I
Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut22-I
Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut23-I
Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut24-I
Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut25-I
Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut26-I
Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut27-I
Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut28-I
Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut29-I
Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut30-I
Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut31-I
Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut32-I
Module input state: Binary state of the Virtual Output (GGIO)
Profibus.Data OK
Data within the input field are OK (Yes=1)
Profibus.SubModul Err
Assignable Signal, Failure in Sub-Module, Communication Failure.
Profibus.Connection active
Connection active
Profibus.Comm Cmd 1
Communication Command
Profibus.Comm Cmd 2
Communication Command
Profibus.Comm Cmd 3
Communication Command
Profibus.Comm Cmd 4
Communication Command
Profibus.Comm Cmd 5
Communication Command
Profibus.Comm Cmd 6
Communication Command
Profibus.Comm Cmd 7
Communication Command
Profibus.Comm Cmd 8
Communication Command
Profibus.Comm Cmd 9
Communication Command
Profibus.Comm Cmd 10
Communication Command
Profibus.Comm Cmd 11
Communication Command
Profibus.Comm Cmd 12
Communication Command
Profibus.Comm Cmd 13
Communication Command
Profibus.Comm Cmd 14
Communication Command
Profibus.Comm Cmd 15
Communication Command
Profibus.Comm Cmd 16
Communication Command
IRIG-B.IRIG-B active
Signal: If there is no valid IRIG-B signal for 60 sec, IRIG-B is regarded as inactive.
IRIG-B.High-Low Invert
Signal: The High and Low signals of the IRIG-B are inverted. This does NOT mean that the wiring is faulty. If
the wiring is faulty no IRIG-B signal will be detected.
www.eaton.com
1006