1 4
P a n e l M a t e e P r o P S U s e r s G u i d e
Connectors & Ports
The location of the connectors and ports is shown in Figures 1 and 2. The Ethernet port
supports 10/100 communications. Two of the USB ports are V1.1 compliant while the
other two ports are V2.0 compliant. Slow data rate devices such as keyboards and mice
should use the USB 1.1 ports.
Note:
All installed peripherals (i.e. PCI Adapter, USB devices, PCMCIA devices, etc.)
on the ePro PS unit should not consume more than 5 additional watts on the 8” and 10
additional watts on the 10”,12”,15” and Blind Node. Consuming more than the this will
change the specified operating temperature of the ePro PS unit.
USB 1.1 (x2)
USB 2.0 (x2)
24 VDC – In
Socket (GND - +)
Video Out
COM2 – RS232
COM1 – RS232/422-485
LAN (Ethernet)
Figure 1: Connector Locations
Caution:
The USB ports are to be used for corrective maintenance only and not for
permanent use in Class I, Div 2 Groups A, B, C, D locations. If permanent use is
required in Class I, Div 2 Groups A, B, C, D hazardous locations then UL approval must
be obtained.