1 0
P a n e l M a t e e P r o P S U s e r s G u i d e
ePro PS Classic
The PanelMate ePro PS Classic operator interface is designed for use by end-users that
are currently using the PanelMate Power Pro software and are ready for the new
PanelMate ePro PS hardware but are not quite ready to convert their PanelMate Power
Pro configurations to ePro Canvas applications. Since the PanelMate ePro PS Classic
OI supports the PanelMate Power Pro and PanelMate ePro PS Runtime software, the
user can utilize the PanelMate ePro PS Runtime software if and when they are ready.
The ePro PS Classic OI is based on the PanelMate ePro PS hardware models with the
addition of software and licenses that allow users to run the PanelMate Power Pro
Runtime software in addition to the three application kits (Document Viewer, Headline
Manager and Recipe Manager). The ePro PS Classic OI can be thought of as a
combination of the PanelMate ePro PS and the PanelMate ePro with the XE (without
Trending) and the OPC options. One difference is in the area of drivers: the ePro PS
Classic OI running PanelMate Power Pro configurations does not support native (non-
OPC) communication drivers but does support up to three OPC drivers simultaneously.
Unpacking
Carefully remove all equipment from the packing cartons and inspect all parts for
damage in shipment. Check packing cartons for all items shown on the packing list.
Keep the cartons and packing materials for future shipment.
If there is equipment damage due to shipment, report the damage to the carrier who
delivered the equipment.
Note:
The Interstate Commerce Commission has a time limit on reporting concealed
damage.
Packing List
The PanelMate ePro PS units includes the following:
1. Qty 1 – PanelMate ePro PS unit
2. Qty 1 – Accessory kit which includes:
a) Qty 1 – Panel mounting hardware kit (Display models only)
b) Qty 1 – 3-pin power connector
c) Qty 1 – PanelMate ePro PS support CD
d) Qty 3 – Spare jumpers used to configure serial ports
e) Qty 1 – KEPServer_ePro CD-ROM (Classic models only)