4 4
P a n e l M a t e e P r o P S U s e r s G u i d e
Recommended Clearance and Maximum Operating Temperature Table
The table below provides the recommended clearance and maximum operating
temperature figures for your ePro PS unit.
Note:
The clearance is the space between the ePro PS unit’s electronics and the top or
bottom of the enclosure.
Models
Maximum
Operating
Ambient
Temperature
Maximum Unit Heat
Output
Recom-
mended
Clearance
All PS Models
All EE Models
All PS Classic Models
7685T-8OD
55
o
C
(50
o
C with optional
PCI adapter
attached)
12” and 15” OD Models
7600E
60
o
C
(50
o
C with optional
PCI adapter
attached)
32W – 8” Display Model
34W – 10” Display Model
37W – 12” Display Model
50W – 15” Display Model
24W – Blind Node Model
4” minimum
If the inside temperature of the enclosure is above the PanelMate ePro PS unit’s
recommended range, you must use filtered fans, heat exchangers, or air conditioners to
lower the temperature. Because hot air rises to the top of an enclosure, the temperature
inside can vary greatly from bottom to top. A fan can be used to circulate air within the
enclosure to maintain a more uniform temperature.
Note:
If an air-purged enclosure is used, it is recommended that the inside/outside
pressure differential not exceed 0.5 PSI.
The following sizing table is offered as an aid in the selection of enclosures to be used
with the PanelMate ePro PS unit. Eaton offers no guarantee or warranty to the specific
applicability of this table as actual conditions may vary and methods of the use of our
products are beyond our control. For specific information about enclosure selection and
cooling methods, contact your enclosure vendor.
for details about the unit and cutout dimensions.
8” Display Models
Enclosure Size
Average Internal Temperature Rise at
Rated Heat Output
16 x 20 x 6
11.5
o
C
20 x 20 x 6
9
o
C
20 x 24 x 6
8
o
C
20 x 24 x 8
6.5
o
C
