Preface
Information in this manual is subject to change without notice and
does not represent a commitment on the part of Eaton Electrical Inc.
Permission is granted to duplicate this material without modification
only for your use or the internal use of other members of your
company or your agents to assist you in the use and servicing of
products purchased from Eaton Electrical. No permission is granted
to modify this material or include this material in a compilation.
RESTRICTED RIGHTS LEGEND
Use, duplication, or disclosure by the Government is subject to
restrictions set forth in paragraph (b)(3)(B) of the Rights in Technical
Data and Computer Software clause of DAR 7-104.9(a).
Contractor/Manufacturer is Eaton Corporation, Operator Interface
Business, 811 Green Crest Drive, Westerville, OH 43081.
TRADEMARKS
PanelMate, Cutler-Hammer, Eaton and ePro Canvas are either
federally registered trademarks or trademarks of Eaton Corporation.
Commercial brand names (trademarks) of products of
manufacturers or developers, other than Eaton Corporation or its
affiliates, that appear in this manual may be registered or
unregistered trademarks of those respective manufacturers or
developers, which have expressed neither approval nor disapproval
of Cutler-Hammer
®
products and services.
©
2005 Eaton Corporation. All rights reserved.
Printed in the United States of America.
P/N 01-00526-00
