Using the Control Panel
9-2
EATON
Powerware
®
9390 UPS (100–160 kVA) Installation and Operation Manual
S
164201604 Rev B
powerware.com
9.1 Using the LCD and Pushbuttons
The LCD on the control panel provides an operator interface with the UPS system.
Figure 9-2 identifies the display areas discussed in the following sections.
METERS
EVENTS
SETUP
ALARM:
INPUT AC UNDER VOLTAGE
OUTPUT
BATT
UPS
INPUT
STSW
A
B
C
D
CONTROLS
LOAD OFF
BYPASS
Figure 9-2. Parts of the LCD
A
The
UPS status
area automatically scrolls between the Powerware model number, current date
and time, active alarms, active notices, and load percent and battery runtime for the UPS.
Shown is a typical alarm message. For more information about alarms and notices, see
Chapter 12, “Responding to System Events.”
B
The
information area
contains data about UPS status and operations.
C
The
menu bar
lists the titles of the available screens. To select a screen, press the pushbutton
underneath the desired screen.
D
The
navigation pushbuttons
function depending on the screen displayed. Use the pushbuttons
to select menu screens or scroll through available screens. The LCD options above the
pushbuttons indicate each pushbutton’s function.
You can use the LCD and the pushbuttons to:
쑺
Look at a log of UPS events (alarms, notices, and commands) (see paragraph 9.2.2)
쑺
Monitor UPS operation (see paragraph 9.2.3)
쑺
Set UPS parameters (see paragraphs 9.2.8 and 9.2.9)
쑺
Control UPS operation (see paragraph 9.3)
After approximately 30 minutes, the display screen darkens. To restore the screen, press
any pushbutton once.
Summary of Contents for 9390 UPS 100160 kVA
Page 1: ...Powerware 9390 UPS 100 160 kVA Installation and Operation Manual...
Page 225: ......
Page 226: ...164201604B 164201604 B...
