Eaton 9390 UPS 100160 kVA, Installation And Operation Manual

Page: 157 / 226

Communication
13-3
EATON Powerware
®
9390 UPS (100–160 kVA) Installation and Operation Manual
S
164201604 Rev B powerware.com
Remote Notification is an extension of the Terminal mode with the additional support
algorithms necessary to control an external modem. Connection to the UPS is made when
a user calls the UPS on the phone. The user has exactly the same capabilities as if using a
terminal connected directly to an RS-232 port.
Remote Notification differs from the basic Terminal mode with the addition the following
functions:
쑺
Call Answer
The Call Answer function allows the user to call into the UPS from a remote location
and enter Terminal mode.
쑺
Call Out
The Call Out function allows the UPS to be configured to call either a remote computer
or numeric paging service over the phone line. Call Out allows the UPS to call a remote
computer and leave a one-line descriptive message of the alarm or notice condition.
Numeric paging support allows the UPS to call a paging service and send numeric
messages.
쑺
Housekeeping
The Housekeeping function maintains the link between the UPS and modem.
13.4 Terminal Mode
NOTE
The brackets ([ ]) in the following bullets indicate standard keyboard characters.
To use a key combination, hold down the Escape key and press the indicated letter key.
In Terminal mode, the user can request the following:
쑺
[ESC] [V] displays the UPS control panel.
쑺
[ESC] [H] displays the Event History.
쑺
[ESC] [N] displays the Node Bits Setup.
쑺
[ESC] [L] displays any new event.
쑺
[ESC] [B] displays the Battery Log.
13.4.1 Display UPS Control Panel
When this function is invoked, a facsimile of the UPS control panel is displayed on the
terminal screen. All controls are functional and can control the UPS remotely. The only
exception is the Load Off control which requires the operator to press and hold the local
control for two seconds to shut down the UPS.
To remotely control the UPS or view UPS information, use the escape key legend to
control the function normally controlled by the control panel softkeys. See Chapter 9,
“Using the Control Panel,” for instructions on navigating the control panel.