Eaton 9315, Installation And Operation Manual, Page: 74 / 206

9 − 12
EATON Powerware 9315 Parallel Capacity/Redundant System
164201150 Rev. E www.powerware.com
Select Time from the Setup menu to display the Time Setup screen. The Time
Setup screen allows you to set the internal time stamp of the UPS. The time stamp
is used for logging events in the Event History Log. Figure 9−10 shows the Time
Setup screen.
Statistics Graphics Setup
Setup
Time
Uninterruptible Power System
UPS System Normal
Events Meters
Port 1
Set Time & Date
DAY DT
MON 07
MON
APR
YR
97
HR:MN
15:06
SAVE
YES
Port 2
48.5
Minutes
Battery
ALARM: NONE
NOTICES: NONE
15 JUL 1998 09:25:42
Language
Figure 9−10. Time Setup Screen
The small return arrow ( ) appears in the upper right corner of the Time Setup
screen. This arrow is a reminder that you can press the pushbutton on the
Monitor Panel to toggle the pushbuttons between the menu box and the
information area. When the scroll bar is in the information area, the return arrow is
in the menu box. When the scroll bar is in the menu box, the return arrow is in the
information area.
When the scroll bar appears in the information area, you can use the pushbuttons
to change the time stamp settings. To change a setting in the time stamp, press
the
and pushbuttons to highlight the setting you want to change. To increase
the setting (make it a higher value), press the pushbutton. To decrease the
setting (make it a lower value), press the pushbutton. If you want to save the
settings upon exit from this screen, be sure the SAVE field is set to YES.