Easy PocketNAV.com OnCourse Navigator 5 User Manual Download Page 69

Page: 69 / 135

User's manual OnCourse Navigator 5

Navigation

- 67 -

5.4.2

Storing a voice command

Survey

You may store a voice command with any destination of your
Favorites. You may then start navigation to this destination "on

command".

Storing a voice

command…

Open the F

AVORITES

screen and select the destination for

which you want to store a voice command.

Tap the Edit icon

The N

AME OF DESTINATION

dialog box opens.

Tap the Voice command button.

The following message appears:

Pronounce the voice command of the destination into the

Pocket PC.
The message box closes.

In the N

AME OF DESTINATION

dialog box, tap

The voice command for this destination is now stored.

Summary of Contents for OnCourse Navigator 5








































































































































Search results

Summary of Contents for OnCourse Navigator 5

Reviews:

Related manuals for OnCourse Navigator 5

Brands by name

Popular brands

Easy PocketNAV.com OnCourse Navigator 5, User Manual

Search results

Summary of Contents for OnCourse Navigator 5

Reviews:

Related manuals for OnCourse Navigator 5

Brands by name

Popular brands